Change a flush in a few simple steps
Changing a toilet can seem like a daunting task, but by following a few simple steps, you can do it yourself in no time. This article will take you step-by-step through the process of replacing a cistern, from prep to finish. When you’re done, you’ll be proud of your work and you’ll have saved money by not hiring a professional.
Step 1: Preparation
Before you start replacing your toilet, you need to prepare. You will need:
- A new flush
- A screwdriver
- Pliers
- Rubber gasket
- A filler
Also make sure you have turned off the water supply before you begin. Once you have all the tools and materials you need, you can move on to the next step.
Step 2: Remove the old flush
Start by removing the flush lid. Use a screwdriver to remove the screws holding the cover in place. Once you remove the lid, you can see the flushing mechanism. Use pliers to remove the mechanism. Once you remove the mechanism, you can see the rubber seal that holds the flusher in place. Use pliers to remove the rubber seal and remove the old flush.
Step 3: Install the new flush
Once you’ve removed the old flush, you can install the new one. Place the rubber gasket on the new flush and install it in the hole. Use a sealant to seal the rubber gasket and the flush in place. Once you’ve sealed the flush in place, you can reassemble the mechanism and cover.
Step 4: Finishing
Once you have installed the new toilet you can turn on the water supply and check that everything is working properly. You should hear a slight click when you operate the mechanism and you should see water flowing into the toilet bowl. If everything works correctly, you’re done! You now have a new flush that works perfectly.
