How to lay tiles on a wall?
Tile is a remarkable material for giving a new look to your room, providing a resistant and durable surface and bringing a personalized touch. This article will guide you through the steps needed to lay tile on a wall with professional and long-lasting results.
Step 1: Prepare the wall
Before laying tiles on a wall, it is important to prepare the surface. This includes cleaning, smoothing and removing areas of moisture. Start by cleaning the wall with a brush and detergent to remove dirt and impurities. Then, sand the wall to smooth the surface and remove any imperfections and holes. Finally, check that the wall is completely dry and free of moisture, using a moisture test to ensure that the wall is ready for tiling.
Step 2: Prepare the glue
Once you have prepared the wall, you can prepare the glue. Tile adhesives are available in a variety of formulas to suit all types of tile and walls. Be sure to choose the correct formula for your project and follow the manufacturer’s instructions for mixing the glue correctly. When the glue is ready, apply it to the wall with a trowel or plastic roller to apply it evenly.
Step 3: Apply the tile
Once the wall is ready and the glue is applied, you can apply the tiles. Start at the edges, adjusting them with shims to make sure they are properly aligned. Use a rubber mallet to adjust the tiles to make them adhere properly to the surface and get rid of air bubbles with a special pad. Once the first row of tiles is laid, continue to apply the tiles from the top down and from the edges towards the center.
Step 4: Apply the seal
Once all the tiles are in place, apply the grout. Use a special mixture of cement and water to prepare the joint, and apply it with a specialized tool designed for this task. Once the sealant has been applied, allow it to dry for approximately 24 hours before using the surface.
Step 5: Care and cleaning
Once the tiles are laid, you can enjoy your new room. To maintain its appearance and prolong its life, be sure to clean the tile regularly with a product suitable for its type. Also, apply a sealer to strengthen the surface and protect against stains and dirt.
Conclusion
Tile is a durable and aesthetic material that can be used to enhance the look of a room.
