Treating your pool water
Pool maintenance is an essential part of health and well-being. If you’ve never treated your pool water before, it can seem like a daunting task. This article will give you an overview of the different chemicals used to treat your pool water and how to use them correctly to ensure years of safe and fun swimming.
What chemicals are needed to treat your pool water?
There are several different chemicals that are used to treat your pool water. Here is a list of the main chemicals that are used to ensure that your water is clean and safe:
- Chlorine – Chlorine is one of the most common chemicals used to treat pool water. It is very effective in killing bacteria and unwanted organisms and in maintaining clean and safe water quality. It is available in different forms including tablets, granules and powders.
- Brome – Bromine is another common chemical used to treat pool water. It is more expensive than chlorine, but much less volatile and can therefore remain active longer. However, it is not as effective as chlorine in killing bacteria and other unwanted organisms.
- Acid – Acid is used to adjust the pH of the water and to help eliminate bacteria and other unwanted organisms. It is important to ensure that the pH of the water is within the acceptable range (between 7.2 and 7.6).
- Algaecide – Algaecide is used to prevent algae growth and to maintain clear water quality. It is available in different forms, including liquids, tablets, and powders.
- Clarifiers – Clarifiers are used to maintain clear water quality by preventing the formation of small particles that can cause turbulence. Clarifiers are usually available in liquid form.
How to use these chemicals
Once you have decided on the chemicals you need to treat your pool water, you need to apply them correctly. Here are some tips to help you:
- Check the pH level of the water before adding any chemicals. Use a pH tester to make sure the level is within the acceptable range (between 7.2 and 7.6). If the level is too low or too high, add acid or baking soda to the water to adjust the level.
- Mix chemicals with water in a tank or bucket
